Details / Information

Home » New Machinery

NC Link-A-Sweep

NC LINK-A-SWEEP
With an increasing awareness for road safety NC have developed this multi-purpose machine with a wide variety of uses, to suit contractors and farmers alike.

Models include the 600 and 700

Features and Benefits

As with all NC equipment ease of coupling and uncoupling is paramount, hence the use of the popular NC Quick attach System.

The 3 point linkage mounted hydraulic link box and sweeper is quickly and easily attached to any tractor over 50hp with an oil flow rate of 6 gallons per minute (27 litres).

When the link box is hydraulically tipped, the brush automatically rises to allow maximum clearance for easy discharge. By removing two locating pins and two hydraulic hoses, the brush can be separated from the link box, thus enabling the link box to be used for other jobs.

Sweeping height is easily adjusted with side locating pins – brushing can then commence in either direction.

When driving forward with the Power Link Box just above the surface the hydraulically driven brush cleanly sweeps all the debris into the link box. When the link box has reached its capacity proceed to your tipping area. This eliminates the back breaking task of collecting debris.

« Previous | Next »

Site Navigation

Browse

Huw Thomas and son, Bryngwelltyn Workshop, Cwmfelin Boeth, Whitland, Carmarthenshire, SA34 0RS

Tel: 01994 240 349

Eve: 01994 240 770

Mob: 07836 205 766

Fax: 01994 241 389

Email: info@huwthomasandson.co.uk