NC Rotary Sweeper
PTO or Hydraulic driven models in width's 6ft 7ft and 8ft (1.83m,2.13m & 2.44m)
There are a number of cheap brush slices on the market, but with over 30 years experience plus extensive research and development NC have produced the highest quality brush, 
They sweep cleaner and last longer, earning NC the reputation for the longer lasting brush. 


PRICE: P.O.A. 

Newest type NC Shear Grab 

NC Engineering offer a selection of grain/silage trailers ranging from 10-18 Tons capacity. The monocoque body comes with a 100mm front to rear taper and tips to an angle of 50 degrees to ensure easy emptying. All trailers are fitted as standard with a sprung drawbar, tandem spring suspension, hydraulic brakes, handbrake, full RTA approved lights (including rear beacon) and front galvanised ladder. The 10 and 12 Ton models are fitted with a 40kph axle while 13-18 Ton models are fitted with high speed axles as standard. Standard wheel is the 385/65x22.5 super single. All trailers are fitted with an automatic top hinged tail door, complete with grain chute and manual securing bar

NC Slurry Separators provide huge environmental benefits with greater flexibility making more economic sense.

NC Slurry Separators have been around for many years, separating all kinds of slurries and liquid wastes:  working in factories, farms and industrial plants. They are now recognised as one of the most efficient and cost effective separators in operation today.



Features and Benefits



The NC system is both simple and efficient, producing valuable fibre for composting and nutrient rich, fibre free liquid, ready for application on to the land.

Just some of the benefits The NC Separator uses a unique brush and roller system to produce several valuable end products. Separated fibre can be composted and sold to other industries, etc or spread on to the land as an organic fertilizer – this enhances the soil structure and encourages an increase in the worm population. The nutrient rich liquid can be applied directly to root system, assisting immediate plant uptake. Reduces risk of run off. No fibre to lodge on plant foliage where ammonia and nitrogen are easily released into the atmosphere. The nitrogen is applied more efficiently as it goes straight to the root system. Separating manure allows producers to effectively control nutrients in both solids and liquids. All foreign objects are removed from slurry or liquid waste before it is applied to land. Less volume of liquid to handle. Paddocks can be grazed within 3 – 4 days of application. If used correctly, a typical 150-cow unit, with followers, could produce over £7000 value of potential nutrients. Fertilizer bills could be reduced up to 75% as separated slurry can be spread throughout the growing season. Separated liquid goes directly into the soil and does not lodge on growing silage crops. Hits the growing plant for maximum response and without contaminating the leaf. Reduced odour as slurry is not lying on ground to cause smell. Can be applied by band Spreader/Dribble Bar making more use of nutrients and also reducing odour. If ground is over rich in phosphate it is possible to reduce phosphate in slurry by up to 50% in a simple cost effective manner.

Specifications

The Separator operates on a simple basis:

After mixing, the liquid slurry is pumped to the Separator weir box, then it flows onto the first perforated screen where the separating process begins. The liquid slurry is slowly brushed the full length of the screen to remove most of the liquid before entering the second chamber where remaining fibre is pressed and brushed the full length of the screen again to ensure the maximum amount of liquid is removed.

NC Tankers are kind to the environment, simple to operate, with safety a priority

Top Fill Tankers

Years of experience and a reputation for quality have produced a range of Slurry Tankers from 900 gallons (4050 ltrs) to 4500 gallons (20,430 ltrs) that have NC’s superior build, quality and design standard.

Features and Benefits - Top Fill Tankers

The NC Top fill Slurry Tanker is of the mechanical discharge type

Manufactured from heavy duty plate to give you one of the thickest tank walls on the market

Centrifugal pump is to NC design and can be driven at 540 or 1000 PTO speed, depending on spread pattern

Uses a low level spreading trajectory which delivers one of the most even spread patterns available

Hydraulic brakes fitted as standard

Non-splash filling turret

Optional Extras – Top Fill Tanker:

Sprung Draw-bar

Wide angled PTO shaft

Extra sight glasses

Hydraulic valve rear spread plate

NC Tankers are kind to the environment, simple to operate, with safety a priority

Vacuum Tankers

Years of experience and a reputation for quality have produced a range of Slurry Tankers from 900 gallons (4050 ltrs) to 4500 gallons (20,430 ltrs) that have NC’s superior build, quality and design standard.

Features and Benefits - Vacuum Tankers

Four fill points, Hydraulic discharge rear valve, 6” Dia Suction hose,

Pump double protected from flooding by two float valves, Hydraulic brakes fitted as standard,

Heavy duty construction throughout, Level indicators fitted front and back,

Available in 12 models from 900 gals (4050 ltrs) to 4000 gals (18,000 ltrs)

All Tankers above 900 gals are fitted with anti-collapse rings

All Tankers have quick attach

Optional Extras – Vacuum Tankers:

Extra fill valve, Dribble bar attachment, High pressure centrifugal pump, Sprung draw-bar

Wide angled PTO shaft, Extra sight glasses,

Can be fitted with NC Hydraulic self-locking fill hatch which remains locked and therefore air tight even when hydraulic pressure is removed

Trailing Shoe Applicator